| Four Points for Daily Maintenance and Maintenance of Safety Cabinet |
||
| As a kind of furniture to protect property in modern families, safe has the function of anti-theft. Therefore, the maintenance of safe is indispensable. Do a good job in the daily maintenance and maintenance of the safe, the life of the safe will also increase. So what are the points for attention in maintenance? 1. The Placement Environment of the Safety Cabinet Safety cabinet in humid, corrosive gas environment, or under strong sunlight and ultraviolet radiation, will cause the failure of rust locks. Although the safety cabinet has been sprayed rust-proof and corrosion-proof treatment, but in a long period of time in harsh environment will still make its surface rust-proof layer crack, discoloration, aging plastic parts, eventually exposed metal surface rust, oxidation, The performance of internal electronic components of locks is unstable due to wet short circuit, which is easy to cause faults. Therefore, the safe should be placed in the room with less room temperature and humidity to ensure its normal service life. 2. Use of Batteries After-sales service statistics, in the after-sales consultation, 45% of customers can not open the safe because the battery is dead, resulting in a lot of inconvenience. The battery of the safe generally uses 4 batteries No. 5. Therefore, it reminds users that if the safe is not used for a long time, the battery should be removed from the battery box, or when the safe has no external power supply, the safe prompt should be replaced in time. If there is an external power box, it can be connected to the external power supply for normal use. If there is no external power supply, it is necessary to use emergency key to open the cabinet to replace the new battery. Of course, it is quite good to replace the new battery. Replacement in time after low power indication 3. Cleaning the Surface of Safety Cabinet If there is a stain on the surface of the safe, it can not be scrubbed with chemical solvent. It should be scrubbed with a clean cloth and a little detergent. If the surface of the safe is scrubbed with corrosive chemical solvent, it is easy to crack and discolor the paint on the surface of the safe, and make it oxidize and rust. Therefore, when cleaning the safe at ordinary times, we should pay attention not to use corrosive chemical solvent to clean or put it in the environment containing corrosive gases. It's quite good to wipe it directly with a cloth and a little water. 4. In the course of use, the emergency power box and emergency key should not be placed directly in the safe. They must be properly kept and stored in a safe place. Once the safe is out of power or the password is forgotten, the emergency key and emergency power box can easily help you solve the problem, so as to avoid the inconvenience brought to you by these conditions. |
||
|
||
